ZCVALVE | Types of Valves, Stainless steel Fittings Wholesale, Valves Manufacturer and supplier in China

All tapered pipe threads are pre-coated with PTFE leak-proof adhesive, and the sealing performance is good. 304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors can be fitted quickly, simply, and intelligently, and save space.

Due to its straightforward design, small size, excellent pressure resistance, and good interchangeability, Stainless Steel Quick Connector Male Thread Straight Through Pneumatic joints may be swiftly constructed and dismantled. As a result, it is frequently utilized in the food, drug, and other industries.

For heavy loads, the hydraulic fast connector is specifically made. The female connector is made of steel that has been chrome-plated. Both the male connector and the female connector have reinforced lock sleeves. They can withstand pressure and wear and tear. lock feature.

Any connector that may be joined or detached quickly is known as a fast connector. The following categories of fast connectors exist: quick connectors for air, oxygen fuel gas, gas and liquid, oil pressure, inert gas, cooling water and oil, semiconductor quick connectors, and quick connectors for gas and liquid.

Due to the single valve, fluid can only travel via the water inlet and cannot flow back through the outflow medium. Single valves may also be referred to as check valves. used in pneumatic systems to stop the flow of compressed air backwards or in hydraulic systems to stop the flow of oil backwards.

The pilot piston type gas pressure lowering valve category includes the stainless steel pressure reducing valve. The main valve and the pilot valve are its two component elements. The pilot valve is opened and closed to drive the piston as it adjusts the flow area of the throttling part of the main valve to realize the pressure reduction and stabilizing function. The outlet pressure is set by regulating the spring pressure. The diaphragm senses changes in the outlet pressure.

When pressures must be swiftly released to prevent harm from system overpressure, utilize these valves for emergency relief. When the overpressure needs to be controlled more gradually, such as in back pressure or pump bypass applications, use our back-pressure/bypass valves. When relief valves are selected for pressure control applications, this will reduce the possibility of pressure spikes, which frequently occur.

The stainless steel fine-tuning valve's features include high precision, small size, dependable operation, and effective sealing. Its structural design is reasonable, and it has a lovely look. It is employed in the vacuum system to modify the degree of vacuum and gas flow. Turning the adjusting knob by hand moves the high-vacuum manual fine-tuning valve into action, and thread transmission moves the valve needle up and down. The valve's medium can be either air or a small quantity of corrosive gas.

The solenoid valve industry makes extensive use of solenoid valve pilot heads. High-pressure solenoid valves fall under one of two structural categories among them: direct acting and pilot operated. The valve can achieve zero leakage thanks to the innovative three-dimensional sealing construction, which allows for flexible selection of various sealing materials. According to their materials, high-pressure solenoid valves can be separated into brass and stainless steel solenoid valves.

A nut is a fastening device with threads on the inside of the hole and a hole in the middle. To fix the necessary joints, nuts and screws of the same size are frequently combined. If the nut begins to loosen due to environmental factors like vibration, you can use glue or pins to further strengthen the afflicted area. Most nuts are hexagonal, then square.

An octagonal-shaped solid metal gasket with a stainless steel ring joint is formed of metal materials through forging, heat treatment, and machining. It is a typical R-shaped metal ring gasket with a radial self-tightening seal function. The basic working idea is to apply pressure to create a sealing effect between the gasket and the inner and outer surfaces of the flange trapezoidal groove (mostly the outer surface).