Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings for Air Line Hose Push Fit Connectors
All tapered pipe threads are pre-coated with PTFE leak-proof adhesive, and the sealing performance is good. 304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors can be fitted quickly, simply, and intelligently, and save space.
304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors
304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors can be installed quickly, simple and smart, and save space; various types, to meet the needs of any pneumatic piping; all tapered pipe threads are pre-coated with PTFE leak-proof glue, and the sealing performance is good.
The characteristic of 304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors
1. Cost saving: When disconnecting and connecting the oil passage through the quick connector, the operation is simple, saving time, labor and human resources.
2. Oil saving: When the oil passage is broken, the single engineering valve on the quick connector can close the oil passage, so that the oil is not easy to discharge, and the hydraulic oil vapor pressure is prevented from being damaged.
3. Environmental protection: When the quick connector breaks and connects, the oil is not easy to leak, which protects the ecological environment.
The precautions of 304 Corrosion Resistant High Temperature Stainless Steel Pneumatic Fittings For Air Line Hose Push Fit Connectors
1. Please do not use for fluids other than available fluids.
2. Do not exceed the maximum operating pressure limit during use.
3. Do not use it outside the application temperature range to avoid damage or leakage of the rubber seal.
4. Do not knock, bend, stretch artificially, so as not to cause damage.
5. Do not use in places where metal powder or sand is infiltrated, so as not to cause poor performance or leakage.
6. For the installation of external threads, it is not necessary to exceed the maximum tightening torque during installation to avoid damage.
7. Do not use plastic hoses with gaps, so as not to cause leakage or drop.
8. If it is used in equipment with vibration and impact, the performance will be reduced.
9. The use fluid must be clean fluid filtered through the filter.
10. It is not necessary to disassemble the quick connector.
