A high pressure safety valve is a type of safety valve designed to protect pressure vessels or piping systems from overpressure. These valves are typically used in industries such as oil and gas, petrochemicals, power generation, and process manufacturing, where the release of pressure could result in serious harm to people, the environment, or equipment.

High pressure safety valves are designed to automatically open when the pressure inside the vessel or piping system exceeds a predetermined level, called the set point. When this happens, the valve will release a controlled amount of fluid or gas, which reduces the pressure inside the system and prevents it from reaching dangerous levels.

It's important to note that high pressure safety valves must be properly selected and sized based on the specific application and the fluid or gas being processed. They must also be installed and maintained according to strict guidelines and regulations to ensure their reliability and effectiveness.

High Pressure Safety Valve Manufacturer/supplier

ZCVALVE is a Chinese company that specializes in the manufacturing and supply of industrial valves, including high pressure safety valves. They offer a wide range of products to meet the needs of various industries, including oil and gas, petrochemicals, and power generation. ZCVALVE's high pressure safety valves are designed to comply with international standards and are known for their reliability, durability, and performance.

When choosing a high pressure safety valve manufacturer or supplier, it's important to consider factors such as the company's reputation, experience, quality of products, and customer service. It's also essential to ensure that the manufacturer/supplier complies with applicable safety and regulatory standards, such as ASME, API, and ISO.

There are many reputable manufacturers and suppliers of high pressure safety valves worldwide, and it's important to do your research and choose a supplier that meets your specific needs and requirements.

single Valves

Due to the single valve, fluid can only travel via the water inlet and cannot flow back through the outflow medium. Single valves may also be referred to as check valves. used in pneumatic systems to stop the flow of compressed air backwards or in hydraulic systems to stop the flow of oil backwards.

Contact us

Stainless steel pressure reducing Valves

The pilot piston type gas pressure lowering valve category includes the stainless steel pressure reducing valve. The main valve and the pilot valve are its two component elements. The pilot valve is opened and closed to drive the piston as it adjusts the flow area of the throttling part of the main valve to realize the pressure reduction and stabilizing function. The outlet pressure is set by regulating the spring pressure. The diaphragm senses changes in the outlet pressure.

Contact us

Stainless steel high pressure relief Valves

When pressures must be swiftly released to prevent harm from system overpressure, utilize these valves for emergency relief. When the overpressure needs to be controlled more gradually, such as in back pressure or pump bypass applications, use our back-pressure/bypass valves. When relief valves are selected for pressure control applications, this will reduce the possibility of pressure spikes, which frequently occur.

Contact us

Stainless steel SS316 double tube joint fine-tuning Valves micro-regulating Valves metering control Valves

The stainless steel fine-tuning valve's features include high precision, small size, dependable operation, and effective sealing. Its structural design is reasonable, and it has a lovely look. It is employed in the vacuum system to modify the degree of vacuum and gas flow. Turning the adjusting knob by hand moves the high-vacuum manual fine-tuning valve into action, and thread transmission moves the valve needle up and down. The valve's medium can be either air or a small quantity of corrosive gas.

Contact us

Sleeve spring type safety relief Valves

Safety Relief of the Sleeve Spring Type In order to balance the force acting on the disc, valves utilise the force of the compression spring. By rotating the adjustment nut on the helical coil spring, the amount of compression can be changed. With this arrangement, the safety valve's opening (set) pressure can be adjusted as necessary.

Contact us

Card sleeve three-way ball Valves

Card Sleeve Three-Way Ball Valves use a top entry ball valve that is made of an overall bar material. ball valve with a smaller diameter.

Contact us

Stainless Steel Hydraulic High Pressure Ball Valves

In hydraulic pipelines, stainless steel hydraulic high pressure ball valves are used to regulate oil flow and cut it off. Small flow resistance loss, sealing performance, and easy operation are all features of stainless steel hydraulic high pressure ball valves. Ball, valve stem, handle, and a sealing device are the primary components of stainless steel hydraulic high pressure ball valves. The valve body is forged from steel, with chrome and yellow zinc plating applied to the surface.

Contact us

Stainless Steel High Pressure Butt Welded Ball Valves

In thermal power plants, high-pressure butt welding ball valves are typically employed on pipelines of various systems to join or disconnect pipeline media. Non-corrosive media, such as water and steam, is the applicable medium. The high pressure butt welding ball valve stands out from other ball valve products because to its distinctive self-sealing construction; the greater the pressure, the more reliable the seal. The product has developed qualities due to the unique technical, performance, and working conditions that cannot be substituted by other items.

Contact us

304 three-way stainless steel pneumatic ball Valves

304 The pipeline applications for three-way stainless steel pneumatic ball valves include medium reversing, confluence, and diversion. They are primarily made up of pneumatic actuators and T-type or L-type three-way ball valves. They can be categorized into flanges according on the various connection techniques. internally woven thread.

Contact us

Internal thread mini stainless steel ball Valves globe Valves

Mini Stainless Steel Ball Valves with Internal Thread Manual valves include globe valves. The ball valve is a type of valve that achieves opening and closing by rotating a sphere with a circular tube that serves as the opening and closing component. The ball valve's opening and closing mechanism consists of a ball with a hole that rotates around an axis perpendicular to the channel to open and close the channel.

Contact us

Stainless Steel High Pressure Compression End Connection Double Ferrule Valves Bellows Sealed Globe Valves

High Pressure Compression End Connection in Stainless Steel Bellows with Double Ferrule Valves Disc, spring, central shaft, and valve body make up sealed globe valves. The materials are all high-quality stainless steel, with the exception of the valve body, which is constructed of high-quality carbon steel. In order to stop the medium from flowing backward, it depends on the medium's flow to automatically open and close the disc. There are several other names for it, including check valve, one-way valve, reverse flow valve, and back pressure valve.

Contact us

304 Stainless Steel Needle Valves Needle Valves Welded External Thread High Pressure Globe Valves

Needle Valves Made of 304 Stainless Steel syringe valves Globe Valves with Welded External Thread and High Pressure High-quality stainless steel makes up the valve body, and a strong alloy surface serves as the sealing surface. It is a cutting-edge connection valve used in power plants, oil and chemical equipment, and instrument measuring pipelines. It has the advantages of strong sealing performance. The arrow on the valve body should point in the same direction as the medium flow when installing.

Contact us
Contact us

Name can't be empty

* Email

Email can't be empty


Phone can't be empty


Company can't be empty

* Message

Message can't be empty